Our 10 Step Process
Step 1: Equipment is brought into your home and is set up. No worry there is no mess.
Step 2: Your existing caulk is completely removed.
Step 3: Drain trip lever and drain screen is removed. This system is designed to work with the bathtub drain in place.
Step 4: The surface is grinded with a special grinding disc. This part is done to very damaged tubs, typical of some sort of chemical damage.
Step 5: The surface is then cleaned and acid etched. This process roughs up the surface similar to sanding. This assures proper adhesion to the surface.
Step 6: The tub is completely dried.
Step 7: The walls and floor are completely masked off to insure against any damage.
Step 8: All chips and imperfections are filled with a two part putty and then sanded smooth to original surface level.
Step 9: A special bonding agent called Semz-Fuze is applied to the surface to insure proper adheshion. I feel to it to be the most important part to a lasting finish..
Step 10: An aliphatic urethane (iso-free) topcoat is then applied to the surface in 3 applications.
313-533-2078
Redford, Michigan
Proud Member of the
